Yeah, Intel is known to be finicky;about the drivers, sometimes older ones are better, sometimes newer ones are better, sometimes none of them are any good. I do run a VPN on the phones/tablet but don't bother with it on the PC or TVs (need the speed and VPN slows things down a bit, would do it if it was needed). hi can i use dun metod on sony xz to hide hotspot usage? I did the fist method, when I do speed test on phone LG V30 Tmobile it shows 35mb but when I browse the internet or use any app data still slow since I used all of my 4gb available. I can go back to an AT&T SIM card and that would probably fix it but before I do anyone have any ideas without rooting the bloody thing? I tried this, and it didnt seem to work. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. You are using an out of date browser. You get into it and youll be surprised the addiction and builds youll come up with. You guys that use PDANet to hide tethering, do you still get a notification when you hit 26-28 GB? Those Asus routers should do it, I currently have the Alcatel Linkzone, but Im capped at 6Gb monthly. Some research into bypassing T-mobiles tether restrictions reveals there are several things carriers can do to detect hotspot usage and block those packets: Sorry for the necropost, I just wanted to point out that currently the only method you can use to hide tethering from T-mo is PDANet with it's "Hide Tether Usage" feature. Select Yes when prompted by installation options (install ADB and fastboot, install system-wide, and install drivers). I'm paying $25 for a one business plan it's unlimited but after 60gb they can slow u down and after 10gb of hotspot they throttle you to 200kbs lol but hey for $45 a mo they hooked me up with Netflix n my 6T lol still saving $15 from my old MetroPCs unlimited. I pushed via iTunes a new carrier bundle with a higher number from 28.3 (MetroPCS) to 28.4 (TMobile_US_iPhone.ipcc) and there are still no APN settings visible. Its a lol over kill but I have yet to overload it as I have every router Ive owned. The one without runs the rest of the house and my PC stick (with VPN installed on it), Glad to see someone ask that. I have an ASUS AC68U router flashed to merlin firmware version 380.66_4. Still nothing, I think my phone has other ways of doing things. Thats what I was saying is u think you are in the newest one. Is there a way to use an unlimited SIM in that and tether through my Asus AC3200? The only modification in the copied firewall command was changing the TTL to 66 http://troypoint.com/how-to-install-exodus-on-kodi/ bring up putty and connect copy the command below, #!/bin/sh The boss ladys phone here is exactly the same as mine with the same Hack edits and her mobile hotspot is still working. Really g2g Yall are doing it extremely off note. o Schlarbs User Agent Switcher add-on in FF 56.0.2 Hi fellas , maybe I could get a little advice here . Lol. Look at your current sons and use the same one that is for mobile web for the hotspot. Im confused. Hello Dave UK Im using PdaNet alone, if I install easy tether and use it at the same time it will be faster? For those of you using USB Tether to Windows 7 computer, I recommend updating the Network Adapter to the latest version. Note: If you find PdaNet isnt working, or T-Mobile is severely throttling your connection, installing a custom Android ROM as Cyanogenmod can help. had to switch usb option on phone to charging only. at com.android.providers.settings.SettingsProvider.enforceWritePermissio Step 3) Whatever device you're going to be using the data on, launch a VPN. net.ipv4.ip_default_ttl=65, You're not entering any commands, your editing the file /etc/sysctl.conf. How did you verify the TTL settings? The app only works if the kernel supports this parameter. We just have to find something to edit the bundle with before you push it, like the guy in the post did. Im close but no cigar on this. Only deprioritization. As far as the 1 in my line, it sets the order of precidence. Many thanks for you guidance and advice. What follows are a few observations. I could post it here if it would help. That must have been in the dark ages. My guess is either a bug in the FW or jacked up settings. Why does the customer feels so guilty when we simply are taking them at their word Truly Unlimited Truly? In another post Mildew you mention how Xbox URLs get flagged. There are too many options here to list them all, but when it comes to simplicity PIA (Private Internet Access VPN) is the best and easiest to set up and will run you about $39.95 a year ($3.33 a month). I have noticed a little bleed thru (i think from my kali box) may have to run command on it to make it recursive. How should I configure the wan interface ttl to 65 network wide? # Then change all of the TTL values to what you need and then delete the #s at their lines beginning. Honestly though an old top with zantyal seems to be the best. Thats the point. Lol. Im having some issues with tethering from a Oneplus 2 unrooted smartphone running android 6.0.1. If we can figure out how to get the phone to except a carrier bundle then we should be able to currupt it and use the unknown but until we can get the phone to except it we are in a intersection of confusion. My phone and Shield are both NOT ROOTED so the only way to change the TTL was via windows. Im not familiarized. I just use the ASUS router as it comes from the factory, nothing changed on it. Im using the Router in a AP setting rather than Repeater Bridge. Its what I got working first. Im using the same VPN service (Private Internet Access PIA) on a DD-WRT router (converted ASUS N66U) . The app only works if the kernel supports this parameter. Now go back to the CUSTOM RULES page and paste the two TTL lines you copied. If you want to try something, see if have a wifi router that can be flashed to dd wrt, tomatos, or open wrt, around you house and use it to mangle the ttl on the fly, but that starts to go down a rabbit hole, you would need a bit to learn how to manually configure wifi repeaters/clients in ddwrt(and or the others) how to mess with telnet, finding Interface names, ect Its not to hard just took me 2-3 days to start getting the hand of it without fumbling for 2 hours. So far, 4 days now, I have no hit to my mobile hotspot. I can play Xbox all day, COD, Battlefield 4, and Sea of thieves, while running a Roku and TV on the other with 3 amazon dot type devices, and an Amazon Sow. While my measured speed was reduced, I saw no performance difference. . by Prvt.N00b Mon Feb 28, 2022 9:58 am, Post I even have tasker automatically connect/disconnect the vpn when I enable/disable my hotspot. ive tried apple ipcu and ibackupbot. iptables -t mangle -I POSTROUTING -o `get_wanface` -j TTL ttl-set 64 by gscheb Sat Aug 28, 2021 3:42 pm, Post Still same methods as the be always used and never liked pda net or any of those applications personally. It is capable of shuttling hundreds of megabits per second and it is efficient. However, most sites use a default TTL of 3600 (one hour). I did not see any confirmation message and wanted to see if I did this right, I type into cmd: adb shell Yes there is something very weird with Visible these days. Like XBOX thats why sometimes folks will see their hotspot data go up as well as the regular data. Pash Also was thinking about a user agent switcher. Changing TTL on DD-WRT is simple. The carrier still knows you are using data on their network, just not via hotspot/USB. Changed apn of hotspot to match the apn of normal mobile date. I will make sure I dont abuse it, its going to help a ton by saving hotspot data usage for my iPad when Im out on the road. When I forget to disable my wifi hotspot (Tmobile app), or to at least disconnect from it, my traffic goes through the slow WIFI hotspot by default. My understanding is, wifi tether is faster than USB. [b]Virtual Wireless Access Point[/b] So my question is this: If I switch my Win7 computer that connects via USB Tether to Ubuntu server, then will I get full speed? PDANet method doesnt work for me anymore either, used it in the past along with Fiddler2 to change the user string agents in browsers but it seems T-Mobile has caught onto those tricks as well since then and I definitely cannot afford a VPN now or ever in the future. For some reason, it appears that my tether is still being tracked when I check my tether vs phone data usage. it is just a guess. Well, this didnt work, is there something I need to do with the phone, other then tether? by Prvt.N00b Thu Mar 17, 2022 5:22 pm, Return to TTL Settings - Throttling, Tethering and Hotspot Usage, Powered by phpBB Forum Software phpBB Limited, Topics addressing TTL settings for Throttling, Tethering and Hotspot Usage. OS Version: 10.0.10240 N/A Build 10240 If I tether directly to the computer, and activate the vpn, I am not throttled, but if I dont use the vpn, then I am throttled. Please let us know. Security exception: Permission denial: writing to settings requires:android.perm The hard part was changing the firmware of an ASUS RT-N66U router I bought for this project. Best way I know to test true speeds are to build to setups, set them up p2p, and run download and upload tests under minimal to crazy extreme and rigorous speed testing. I average 10-15 mbps on B66. I suggest you start a new account and do it right this time. For my set up I have to do 2 things for it to work on T-Mobile unlimited. You are using an out of date browser. Did you really mean to say date in mobile date? There is a comment before my last one awaiting moderation. My signal that I saw on CellNetwork Info APP showed I had a weak signal. If it works it works, I just like to make sure all knowledge is available to the people reading. Changed apn of hotspot to match the apn of normal mobile date. Yes, change my TTL setting to mimic my android device as opposed to other devices. That might help with resolving this important last step on a non JB. Hope this bit of info helps. Fantastic! I had tried to tell him, in one of my known and attested failures at diplomacy, to just shut up.). DDT-wrt and tomato have a pretty easy setting for this feature. [/code]. Pdanet and easytether pro were both full versions. Ok. @jay & @ Mildew Lets keep the conversation focused on helping the readers. Im getting speeds over, what according to the Internet, the lte standard. Sidechula I have done NO MODS AT ALL to phone. Thank you, Tony, No USB cable s needed at all. I'd love to find a way to get around the throttle limit. I really want to limit my learning curve here, as in, Im not ready to study up on Linux. the only thing that they dont really use any more is the user-agent strings BUT IF YOU GET THEIR ATTENTION THEY STILL CAN PHYSICALLYLOOK AT THESE. Perhaps you, or anyone else knowledgeable with iptables scripting could answer this: Here is the code I am using : The end of the coded portion must include a [/]. You should see it soon. Hey so I applied your ttl cmd prompt for 65 and have a rooted note 5 custom rom. by punkguy00017 Sat Aug 21, 2021 5:09 am, Post The TTL parameter is controlled by /etc/sysctl.conf.. In my case (Tmobile w/ OnePlus unlimited data plan), I see NO video throttling when I turn off the VPN. i want to use mobile hotspot without them throttling me. sysctl net.ipv4.ip_default_ttl=65 or Change TTL, provides easily change the TTL value. I to am a usier of Pdanet with T-Mobile, with my Samsung Galaxy s7. [RECOVERY] [Infinix Zero 5G] [TWRP 3.7.0] [X6815/X6815B] [12+] [UNOFFICIAL] TeamWin Recovery - Initial release. Hope this helps. the router also supports ndis(Ethernet over usb) which is nice, right over a usb 3.0 connection, so i can use the built in usb teathering directly to the router, did that for a time but the charging of the phone was flaky and its more convenient to just have it pick up the hotspot automatically. Thanks Jay. In the right pane, add the following value: By rejecting non-essential cookies, Reddit may still use certain cookies to ensure the proper functionality of our platform. I can't figure out why but both my 1+3 and 1+6T have no limits on bandwidth out of the box. This probably isn't the only method out there, but it worked for me. Michelle, So then is your ASUS router set up as some sort of bridge mode so that it can connect to your WiFi hotspot, and then forward that wifi signal to all wireless connected and wireless devices to the ASUS router? If I enter adb shell lower case it says error: device not found null no idea why its not working. Have a nice day. Download Root Explorer from Google Play Market Put your device in airplane mode. As far as showing you how, the proxy doesnt work that well for anything other than web traffic and apps that run on port 80. Im still using metro. You have freed my from my tether and now I am running free! So far using hundreds of GBs and getting totally usable speeds.low end maybe 7-8MBS at worst and usually around 18-25Mbssometimes even 30+Mbs depending on how busy the network is. think its build 10.3.1?? FEATURES: HM 10 TTL BLE Bluetooth Module It's easy to use and completely encapsulated. It works just fine if I use a VPN but I got it of using one to bypass hotspot tracking a LONG time ago for many many reasons. You could do it though as it doesnt flag red only yellow on tmob/met, for now. If we could tether to a router, we would be able to take advantage of the faster tethering speeds for Wi-Fi for all devices. As far as the tags; lets see how well my memory is. Most phones have a TTL of 64. Hope you guys enjoy! Its been a LONG time since I have done it because Im jailbroken on everything I own. Thanks for your comments! Connect your phone to your computer via USB cable. Any help is appreciated. I never get much more then 30Mb/s myself because im on metropcs. Note: If you see error: device not found it is usually because A) you need to update your phone USB drivers on your PC or B) your USB cable isnt capable of transmitting data because it is only designed to charge the phone or C) USB Debugging isnt enabled. messing with this stuff since 2012, > ive been doing this for years and using 800GBs-2TBs of data each month no issues. 2. Do you have a way of editing your bundle before pushing it?? are the bundles in edited and for your model?? Right on what's the no cap no throttle unlimited run you a mo? do they block urls that phones do not use? Atleast you have something that works. My connection speed is 8Mbps for first 30GB and then 512kbps thereafter (and they call it a broadband con3ction?!?!?! iptables -A FORWARD -i eth1 -o br-lan -j ACCEPT. Update: We were contacted by a T-Mobile representative who clarified that only 3% of their customer base may see throttling above 28GB on a single line. My apologies on the delayed help Im just really caught up on an issue of my own. Have you tired adding to /etc/config/network -. Think of it as any saved document; if you save another of the same exact name it should over write it and for these purposes void the sig causing it to revert to the unknown bundle. for wndows, follow these steps: Any help? Marc Im not sure what you mean by I have three. Just dont click it. I have a Windows machine and Metro PCS is my phone service provider (t-mobile PAYG). Sounds good to me. Add the following line: iptables -t mangle -I POSTROUTING -o usb0 -j TTL --ttl-set 65 Click Restart Firewall to save If necessary, change usb0 to wlan0 (or whichever interface name corresponds to your tether interface.) at android.os.Binder.shellCommand(Binder.java:594) Used 80gigs last month without counting toward my T-Mobile hotspot counter. On an LG K7 w/ metropcs 8gb plan, android version 5.1.1. Unless that is piping up then Im sure that you are using the newest one that you can use unedited. I have 2 mofi 4500 SIm 7 using Vis*b1e, for about 7 months.. Win7 65 (registry regedit described by jcwarez above) Now with phone.. In about 20% of areas tmobile/metro is already set up for 300+ lte. FYI, today my tether counter is restarted. How to change ttl to 65 Installing and Using OpenWrt Network and Wireless Configuration quadcore December 28, 2018, 12:13am #1 I have linksys ea3500 running openwrt 18.06. on it. The issue I've run across so far is when traveling, it can revert back to original settings when changing towers, but only sometimes. The Caps was a typo, but since it's working, I left it. you are repeating the exact same thing i said, it has a slow cpu amd low amounts of ram, you clearly arent reading what i say and assuming what i mean, case and point, wifi only slows down when its the limiting factor, a rarity even for lte (the average speed of lte on T-Mobile is around 18Mbs) the only real lose is 3-8Ms latency not a huge toll for the convenience, also for all your talk of servers you are likely confusing others, anything can be a server and you are coming off like you mean a rack mount, all i am doing is giving options to people (of which there a multiple) from the simplest of just editing the ttl of the end point, to the simplest that would allow a whole network to run off it using a router, to the most rebust a pf sense box or linux based machine, all you have done is repet somthing i said on this forum 8 months agoand saying it is the only way that makes sense not having a understanding that for most it doesnt matter either because of usecase or because the towers in their area couldnt even give them more if they wanted, not everyone needs a pc running 24/7 and 90% of the people that have visited this forum could never see any bandwidth benefit from running a server anyhow. You're going to be entering a command to change your TTL. the 54xx main issue was being easily overloaded. I go through this stuff when I transfer my scripts between firmware/OS, IM mostly sure it is my script. Jay that is awesome! Some things you can try:-change your browser user agent on the client side (the computer you are using) to an iphone user agent. My current setup works well and without issue. Any suggestions ? For me the Dun=0 trick and PdaNet worked well enough, I didnt have to resort to a VPN, but your mileage may vary depending on what phone you have and the total network traffic in your area. Ah well! Mike, perhaps youre teathered via USB and WIFI hotspot simultaneously? Shiny objects everywhere! Android creates a second rmnet interface in which hotspot is routed over. It was still totally HD streamable, but with a stronger signal its definitely faster and better now. The implication being full speed and priority tethering without a plan that you can share with the house. Next we will see the procedure for editing this parameter on computers with Windows 10. It doesnt cause any problems, but Id still like to know what it is. Only surfing and downloading directly to he phone is 4G unlimited Tethering and Hotspot are limited to 4G 26GB a month, then down to about .21 bps speed downloaing tethered to a PC. [/quote] Furthermore, the article talks about using a VPN to avoid video throttling. Anyone out there struggling just d/load == PDA NET and EASY TETHER and you are well on your way. By changing the TTL you can make traffic appear to originate from the phone instead of via tether. Ive got a Linksys 54G w/ DD-WRT installed lying around but wouldnt you recommend a newer router for all the fancy MIMO features? at com.android.providers.settings.SettingsService.onShellCommand(Unknown At home on the same tower, no issues so far. Think of it as a package being carried one says nothing and the other says its a package of nothing from somewhere else. Glad it is working well for you. Hide teher usage for most work. By using a TTL of "65" and a VPN. The TTL stuff worked on my Windows laptop. Doesnt matter if you use fast.xxxx.com or alpha/beta BUT YOU CANT USE THE ORIGINAL HOTSPOT APN itll say mobile web or some shit. Others also add in browser user agent filters as well. Thank you. Im trying to understand what youre doing, but I think me/we need a little more info. I have a rt-ac68u with merlin with usb tether to phone and dont want to use vpn if possible. Would you mind show me how? Thanks. I do not have money for Pfense. After I hit enter I just see: doha_n:/ $, I was wondering if this means it came through or am I doing something wrong? Anything I can do about this or do I have to wait it out until the next cycle? Weird thing though is that when I put my Sim card in the router I can still get 50mbps on Speedtest.net but everything else is super slow. Verizon ttl 64 Atnt/FirstNet ttl 65 Visible need to set as follows #start TTL rules iptables -t mangle -I POSTROUTING -j TTL --ttl-set 64 iptables -t mangle -I PREROUTING -j TTL --ttl-set 64 ip6tables -t mangle -A POSTROUTING -o wwan0 -j HL --hl-set 65 ip6tables -t mangle -I PREROUTING -i wwan0 -j HL --hl-set 65 #end TTL rules T-Mobile Ones unlimited data plan isnt quite as unlimited as advertisedespecially when it comes to tethering. Plenty of speed and no throttling. If you ever do go jailbroken or if you are on a 6 or newer you can use the VoLTE and your internet wont drop for calls. Thanks. Changing USB port on my PC. Yes it was in small text somewhere.. Oh well). Thank you Michelle! Is there a simple(ish) way to repeat the TTL trick for the data coming from the ps4 through my mac via cable or direct through the phones hotspot? Then double click it and add value 65 as hexadecimal. ~How did your jailbroken device corrupt a carrier bundle (to then copy to other device)? Ive tried user agent switchers without luck, thats stuff pda net has done, not much you can do other then switcing to something else. Works great when I turn on the VPN connection but everything behind the phone loses internet. Sorry about delay, I have been using this method for 4 months now, last month 78K on teather and Ive used TBs of data. that happened after the last update. See when you break the Sig it ignores the file unless jailbroken/tweaked. Security exception: Permission denial: writing to settings requires:android.perm At this current time I have quite playing with the Opn/pfsense as I gave up. If you have home internet, you can vpn into your home router and basically be your own vpn provider. You are aware you don't need to use the command line to make firewall entries, right? Looks like nobody cares about TTL on android. I have an iPhone on the T-Mobile One plan. I going to try wifi tether out. Lo and behold, there was no change on the hotspot data usage of my account, so Im good to go. Theres no such thing as luck, yet perhaps @Mildew (or others) perhaps might have tips to the indigent. Please just make a new thread. So don't be afraid to try different things. Dear me o my at the typos. hope that helps as it was just a light breeze over but should give you the gist of it. I also know that last I checked I was able to use iBoot Bot?? Any ping that runs through the router. Do you think there's chance it will work if value set on boot? No way that a phone can process as much, cleanly and as fast, as a proper built sever. For my set up I have to do 2 things for it to work on T-Mobile unlimited. Going through the Win 7 computer cuts the speed in half. Click to expand. I wish I knew more programming, just not one of my strong suits. 3. How do you post the code syntax in your messages? Win7 65 (registry regedit described by jcwarez above) They are not available to edit on the iPhone. No warnings, no speed cuts. I've never been throttled for going over my cellular data, only hotspot. Chris pfsense is free jusT like all of the other nix. Normally traffic is routed around the VPN through the hotspot channel. It seems that the cell providers dont care too much unless it interferes with the deprioritization they already have in place. Just my experience. by LoveMeSomeCALTE Fri Aug 20, 2021 10:31 am, Post This has been my setup for four years now: Dd-wrt with iptables to edit the ttl value to 65 then restart. Not theory Been doing this for many years. Because all known devices have TTLs that are an even number (except 255) like 30, 32, 64, 100, 128, or 200. modprobe xt_hl Can someone please confirm I did this the right way? so far so good, but im waiting on the troll, so b4 anyone calls BS theres the puddin.. Speedtest this is with seti@home running and going thru my VPN server on my mint box, NOT PHONE, ps nknown Source:9) Throttles?? For this operation, we will need a file manager with root access, such as Root Explorer. As far as i know the ttl is enough, if that doesnt work you can always install a local proxy sever on the phone, and set that as the proxy server for the pc. I even used it once when I had an internet outage & it was a nice backup. It has to dO with the sites setup. in a rc.local file, or maybe there's a /etc/sysctl.conf file you can modify the net settings in. at com.android.providers.settings.SettingsService$MyShellCommand.putForU There are many pros to running a server setup as well. That is why I need special help from others. Jay you dont need a router you just need a phone with unlimited data and use your phone as a hotspot to power up your laptop. For those worried about (as you rightfully should be) the best way to do it is to use the plan thats supposed to only allow up to 480p (it actually allows above but scales it back to around 1080p). Can you tell me if the SE has native VoLTE/Vo4g unlocked?? Setup is still working well. And one more thought, the people who design the advertizements for the cell phone companies DO sell Unlimited LTE! I have a galaxys7 with metropcs UNROOTED What would work so they Don't see how much data I'm using? As I cant think of a way to delete them off of a caged phone, the only thing I can think of is to overwrite it THEN currupt the Sig because your current bundle will then be gone, due to being over written. Also if anyone has to use a comm patch instead of manually signing the bundle you can use the one Chinasnow is testing out. Cookie Notice NO the speed will remain full speed within a Meg or two unlike youre Windows set up. T-Mobile and AT&T have pretty good coverage where I am (I have a cell amplifier as well) and the above discussion re: bypassing any hard/soft data limits is right up my alley. When we connect to the desktop, we also have to start the PdaNet app on the desktop as well, how do you do that with a router? Please list all the steps. Im gone, I went Into a good bit of detail last time Im pretty sure either way I know I have enough for a google battle to fight your way to freedom. droid hands a package and says hey I have this anonymous package from an undisclosed location that Im sending for someone else, give me the return package and Ill make sure he gets it. The solution has fucking killed me. Trying to get this set up for my parents as they have no other internet options. When I said set registry I meant set it to 64. no throttle issues til I hit the magic secret number of GBs (I think thats BS too) Ive hit well of 40GB in a month and not been throttled (or if i was i couldnt tell) here is some screenies that i just took (see my post above for the method (i didnt do anthing to my phone) its STOCK Zmax Pro right out the box, I did the above method on my Windows lappy and my Linux boxes I just appended #~net.ipv4.ip_default_ttl = 65 (no quotes) to the end of my /etc/sysctl.conf, If i was everybody else reading this, i would try this method and see if it works for you Youre gonna have to mangle your TTL header, make sure youre on the same APN, and use method one; at minimum. Also if you edit ttl you need to make sure to do it right, its easy to use hex on accident when editing it on Windows. [code] After youre signed in select More Settings on the right, then Advanced. This didnt work eager for suggestions. I dont recommend it personally as it uses a lot of overhead on the phone its self and then also some on the device tethered. Still dont get how youre tethering on the 50 plan with no iPhone JB. So far it is slower than my 4G phone.

Temple Garden Chambers, Humana Rn Care Manager Salary, Pulpit Rock Norway Deaths Per Year, What Happened To The Greville Family From Warwick Castle?, Stem Cell Therapy Cost In Usa, Articles C